Hotend Nozzle Wrench for E3D V5 & V6 Nozzle Removal or Tightening

Description

This cross wrench is the easiest to use wrench we have found here at BriTech3d, to use for the tightening or removal the nozzles from e3d hotends and the e3d clones. Heat up the heater block, lock it down and then insert the 7mm end over the nozzle and twist. Since the wrench covers the entire end of the exposed part of the nozzle and applies pressure from all sides, the brass nozzles are less likely to end up with rounded sides. Added bonus, if you ever have a 4, 5 or 5.5 nut to remove one of the 3 other sides will work for those.
Item Name: Mini Cross Wrench
Size M4 M5 M5.5 M7
Qty: 1 Cross Wrench