Cartridge is made of stainless steel tube resistant to corrosion. The heating wire inside is wound onto a ceramic core. The number of coils varies depending on the power, and provide a uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures.
Voltage: 24V Power: 50W
Cartridge material: 304 Stainless Steel
Cartridge Size: 6x20mm
Heating temperature: up to 350 degree
Line length: 39inch /1M
Line thick: 0.5 mm2 (The cross section of the copper wire inside the heater is 0.5mm2)
Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.
1x Heater Cartridge