The stock Creality CR-10 Hotend from Creality.
For Creality, Ender or Hictop brand of 3d Printers including models :Ender, CR-10, CR-10s, CR10-S4, CR10-S5
Instead of the traditional ceramic cotton insulation we provide with this hotend a silicone sock. Much easier to use and longer wearing than the traditional cotton insulation. Also included an extra 0.4 nozzle. Along with a bowden tube and pneumatic connectors.
MK10 Extruder Hot End kit, white wires are thermistor, red wires heating cartridge which is 12V 40W.Package List:
1x Aluminum block
1x Heating cartridge (wires 1 m long, 12V /40W)
2x 1.75MM 0.4MM Brass Nozzle
1x M6*30mm Throat [Heatbreak] (Bowden tube travels through to the top of the nozzle)
1x Thermistor (1 meter long)
1x 1 meter long bowden tube or PTFE
1x Silicone sock for heaterblock.
1X Packet of heatsink compound for throat.
Material: Aluminum & Stainless Steel & BrassHeating tube (heating tube 1 m long, 12V /24V 40W)
- M6*30mm heatbreak
- MK10 extruder Hot End kit,Pro Tip: We include a small packet of Thermal Grease, for best results we recommend spreading it on the part of the throat that is inserted into the cold end/radiator. This will decrease the potential for clogs as the heat will radiate out of the hotend easier.We recommend mounting the heaterblock with the two side screws and ignoring the grub screw tightener on the throat. The reason is because the screws are a more solid way to assemble and less likely to vibrate lose and we have had customers damage the throat tightening the grub screw.